Connecting To Vcr (For Archiving); Connecting To Amplifier - Toshiba HDD-J35 Owner's Manual

4

CONNECTING TO VCR (FOR ARCHIVING)

A VCR can also be connected to this recorder through the Composite Video and Stereo Audio output connectors
located at the back of the HDD-J35 recorder for archiving programs from the HDD. Use a composite Audio/Video
cable to connect from the HDD-J35 Video/L/R output connectors to the VCR's Video/L/R input.
To Composite Video
inputs
Audio/Video cable
(supplied)
Match the
colors when
connecting
5

CONNECTING TO AMPLIFIER

If you connect this recorder to an audio amplifier equipped with a Dolby® Digital decoder, use an optical or
coaxial digital cable (not supplied) to connect from the recorder's "DIGITAL AUDIO OUT (Optical/Coaxial)" to
the digital audio input of your amplifier. In this case make sure that you do not need to connect the audio
connectors (red and white) on the Audio/Video cable to your TV.
24
VCR
SD VIDEO OUT
Y/G
VIDEO
P /B
H
B
V
P /R
R
Amplifier equipped with
a Dolby decoder
: Front speaker
: Rear speaker
Subwoofer
: Centre speaker
: Signal flow
To Audio inputs
white
DIGITAL
HD VIDEO OUT
AUDIO OUT
(COAXIAL)
RGB
HDMI
(OPTICAL)
HDD-J35
TO DIGITAL AUDIO
(OPTICAL or COAXIAL)
Optical or Coaxial digital cable (not supplied)
Audio/Video cable
(supplied)
red
ANALOG
AUDIO OUT
L
L
R
R
HDD-J35
white
red