Installing The Recorder; Step A: Connections; Connecting To Tv - Toshiba HDD-J35 Owner's Manual

INSTALLING THE RECORDER

Follow steps A to C below. Your recorder will be ready to display digital programs on your TV.

STEP A: CONNECTIONS

DO NOT PLUG THE RECORDER INTO THE MAINS YET.
Before you use this recorder, it is necessary to connect it to your TV.
1

CONNECTING TO TV

1-1.
Connection to Antenna
Disconnect the antenna cable from your TV and connect it to the "ANT. 1 IN" terminal on the back of the
recorder.
1-2.
RF Loop-through Connection
To achieve RF loop-through for the in-built twin RF tuners, connect the RF Coaxial Connectors (supplied) to the
"RF 1 OUT" and "ANT. 2 IN" terminals as shown in the diagram below.
1-3.
"RF OUT" Connection to TV or VCR
The "RF 2 OUT" provides you a RF loop-through function to receive analogue TV programs as well as digital
programs (for Integrated Digital TVs only). Use an RF coaxial cable (not supplied) to connect the HDD-J35 "RF 2
OUT" terminal to TV's or VCR's antenna input.
Before connecting or disconnecting the antenna cable, unplug the recorder, VCR, TV and
antenna booster, if any.
To TV antenna input
18
RF Coaxial
Connector
HDD-J35
~
AC IN
ANT. 1 IN
RF 1 OUT
RF coaxial cable
(not supplied)
Antenna cable
(not supplied)
ANT. 2 IN
RF 2 OUT