Connecting To An Audio System; 7Via Hdmi Output; 7Via Digital Audio Output - Toshiba HD-XE1 Owner's Manual

Connecting to an audio system

You can enjoy the benefi ts of Dolby Digital Plus or Dolby TrueHD by connecting the HDMI output of your
player to an AV receiver with an HDMI audio input. You can listen to down-converted Dolby Digital Plus
and Dolby TrueHD as well as Dolby Digital and DTS using a receiver with Dolby Digital and DTS decoding
capabilities and an optical digital input.
Via HDMI output
Make the connection as below, and set "Digital Out HDMI" (
HDMI compatible device
You may need to adjust the HDMI
audio output to match the
capabilities of your AV amplifier.
In this case, set "Digital Out
HDMI" ( page 55) to "PCM".
Via digital audio output
Make the connection as below, and set "Digital Out SPDIF" (
Caution
When you are connecting (via the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack) an AV decoder that does not
have Dolby Digital, DTS or MPEG decoding capability, be sure to set "Digital Out SPDIF" (
Otherwise, high volume sound may damage your hearing as well as the speakers.
HDMI input
HDMI cable
(not supplied)
AV amplifier
page 55).
HDMI input
HDMI output
AV amplifier
page 55).
Digital input Digital input
Coaxial Optical
Optical digital cable
(not supplied)
or
75 coaxial cable (not supplied)
HDMI cable
(supplied)
page 55) to "PCM".
25