Alfa Romeo Giulia Owner's Handbook Manual page 33

Hide thumbs Also See for Giulia:
Table of Contents

Advertisement

Longitudinal adjustment
Push switch (1) fig. 31 forwards or
backwards to move the seat in the
corresponding direction.
Backrest angle adjustment
Push switch (2) fig. 31 forwards or
backwards to adjust the backrest in the
corresponding direction.
Electric lumbar adjustment
Use the joystick (3) fig. 31 to operate the
lumbar area device to obtain maximum
driving comfort.
Press the following parts of the joystick:
top: inflates the cushion;
bottom: deflates the cushion;
front: inflates the upper part of the
cushion;
rear: inflates the lower part of the
cushion.
WARNING The electrical adjustment is
only allowed when the ignition device is
turned to ON and for about 2 minutes
after it is turned to STOP. The seat can
also be moved after opening/closing
the door for about 2 minutes; car
locking/unlocking or switching on of the
centre front ceiling light.
Seat angle adjustment (tilting)
(where provided)
The seat angle can be set to four
positions.
Lift or push the front part of the control
(1) fig. 31 to move the front part of the
seat in the corresponding direction.
Release control (1) when the seat has
reached the desired position.
Backrest width adjustment
(where provided)
Press switches (4) fig. 32 to adjust the
backrest width to your body shape, by
introducing air into the side padding.
A better fitting backrest holds the body
better when cornering.
32
Seat cushion extension
(where provided)
Lift the lever (6) fig. 33 and push the front
of the cushion forward or back. It can
move a few centimetres.
33
Memorising driver's seat positions
Buttons (5) fig. 32 allow you to store
and recall three different driver's seat
positions.
Storing and recalling is possible with the
ignition device in the ON position and
with the car standing with the car moving
or for 20 minutes after the ignition
device is turned to the STOP position.
The performed position memorisation is
confirmed by a beep.
To memorise a seat position, adjust it
04066S0015EM
with the various controls, then press the
button where you want to memorise the
position for 1.5 seconds.
When a new seat position is memorised,
the previously memorised position
on the same button is automatically
overwritten.
Recalling a memorised position is also
possible for about 3 minutes after the
doors are opened and about 1 minute
after the engine is stopped. To recall a
04066S0017EM
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents