Sequential Image Photography (Burst Mode) - Toshiba PDR-M11 Instruction Manual

Sequential Image Photography (Burst Mode)

The sequential shot takes four pictures in sequence with a 1-second (low- light) to 1/30-second (bright-light)
interval between each frame.
This mode is effective for continuously photographing moving subjects.
Set the mode dial to [
Set the REC. mode to [BURST].
1 Press the MENU button.
2 Use the
or
button.
3 Use the
or
ENTER button.
4 Press the MENU button.
For details on the REC. mode,
[ ] displayed in the LCD monitor or the status display.
Compose the picture, press the shutter button down halfway, and press it down
fully. Page 37
The shutter is opened and closed 4 times.
Memo
• The photography interval changes according to the photographic conditions.
• Flash photography is not possible.
• To take a sequential shot, there must be at least four images left on the SmartMedia
• The burst photography is not possible when you set the image quality to TIFF.
If you want to take a picture in burst mode, set the image quality to JPEG (
51-55 PDRM11-E
].
buttons to select [REC.MODE] and press the
buttons to select [BURST] and press the
Page 53.
- 51 -
51
R C E M . ENU
. W B . AUTO
E R MODE C . 1 SHOT
. E X . P . 1 SHOT
O C R L O U B RST
NORM AL
H S P A R
I D S P L AY AL L
TM
.
, or ).
01.6.21, 6:03 PM