Table of Contents
Advertisement
7.4 DN (DIP4) : MID/S.DNx32
DN mode select switch.
MID (ON side) :
In low light conditions the IK-65WDA automatically cuts the chroma signal and boots
the gain up of the luminance by 6dB.
S.DN×32 (OFF side) :
Under the low light condition, the IK-65WDA automatically activates the slow shutter
function.
FACTORY SETTINGS
LINE LOCK : ON
IRIS
: DC
WDR
: OFF
DN
: S.DN×32
NOTE
• When you change DIP 2, 3 or 4 then the present settings are displayed for
about 2 seconds on the upper left side of the screen.
• When the on screen menu ("OSD") is displayed and DIP 3, 4 is changed, then
the present settings are stored and the OSD ends.
10
Advertisement
Table of Contents
