Names And Functions - Toshiba CMOS Color Camera IK-HR1D Instruction Manual

3. NAMES AND FUNCTIONS

[ Front ]
11 12
[ Bottom ]
Prism faceplate
DC IN 12V terminal
REMOTE terminal
DISP button
PAGE button
MENU UP button
MENU DOWN button
DATA UP (AWB) button
DATA DOWN button
DVI-I terminal
Mounting holes M3
Mounting holes M2
1 Prism faceplate
3 REMOTE terminal
The protection cap is attached on the lens mount portion. After removing the cap,
mount the lens. Be careful not to scratch or touch the optical area.
Accepts a DC power input (12V).
To connect to a RS-232C device for remote control function.
Used when switching the display.
Used when switching to the menu and when selecting the menus.
Select the function to be confirmed or changed on the menu.
Select the function to be confirmed or changed on the menu.
Changes the value of the function selected by the MENU (UP/DOWN) button. (Also
used when using AWB.)
Changes the value of the function selected by the MENU (UP/DOWN) button.
Outputs DVI-I to connect to a DVI monitor.
Used to attach the camera to a mount. When using a tripod, attach the mounting
bracket: JK-KTF1 (option) to these holes.
Used to attach the camera to a mount.
[ Rear ]
7
2
DC IN 12V terminal
4 DISP button
6 MENU UP button
8
DATA UP (AWB) button
9 DATA DOWN button
7
MENU DOWN button
PAGE button
5
DVI-I terminal
10