4 3 Changing detail (outline) gain
Move the " " to DTL GAIN by pressing [MENU UP], [MENU DOWN] buttons.
Select the desired value of the detail gain by pressing [DATA UP], [DATA DOWN] buttons.
The detail decreases.
4 4 Changing DTL B.FRQ (detail boost frequency)
Move the " " to DTL B.FRQ by pressing [MENU UP], [MENU DOWN] buttons.
Select the detail boost frequency by pressing [DATA UP], [DATA DOWN] buttons.
4 5 Changing master pedestal
Move the " " to M. PED by pressing [MENU UP], [MENU DOWN] buttons.
Select the desired value of the master pedestal by pressing [DATA UP], [DATA DOWN] buttons.
M. PED decreases.
[ DATA UP ]
-7
0
[ DATA DOWN ]
[ DATA UP ]
LOW
NORMAL
[ DATA DOWN ]
[ DATA UP ]
-128
0
[ DATA DOWN ]
The detail increases.
7
HIGH
M. PED increases.
127
23