Toshiba CMOS Color Camera IK-HR1D Instruction Manual page 16

(b) Changing the automatic shutter detection (ratio between peak and average value)
Move the " " to PEAK/AVE by pressing [MENU UP], [MENU DOWN] buttons.
Select the ratio between peak and average value by presshing [DATA UP], [DATA DOWN] buttons.
(Peak:Average)
The peak value increases by pressing
00:10
The peak value decreases by pressing
(c) Changing the automatic shutter response speed
Move the " " to SPEED by pressing [MENU UP], [MENU DOWN] buttons.
Select the response speed by presshing [DATA UP], [DATA DOWN] buttons.
The response speed becomes faster by pressing
The response speed becomes slower by pressing
(d) Changing the automatic shutter zone area
Move the " " to AREA by pressing [MENU UP], [MENU DOWN] buttons.
Select the measurement light area by pressing [DATA UP], [DATA DOWN] buttons.
PRESET A
The available picture area is shown by the shading correction on the screen that is parted in 64.
PRESET A
PRESET E
Note:
These picture areas are not displayed on the screen.
05:05
1 10
DATA UP
PRESET B PRESET C
DATA DOWN
PRESET B
[ DATA UP ]
10:00
[ DATA DOWN ]
[ DATA UP ]
20
[ DATA DOWN ]
PRESET D PRESET E
PRESET C
16
PRESET D