Watching Picture-In-Picture (Pip); Switching The Main And Small Pictures - Toshiba 36A61 Owner's Manual

Watching picture-in-picture (PIP)

The picture-in-picture (PIP) feature allows you to watch two pictures
at the same time. The small PIP window can display a signal from a
TV broadcast or an external source, such as a VCR.
To display a TV broadcast in the PIP window:
1. Tune the TV to the program you want to watch in the main
window.
2. Press PIP to display a small picture (one press displays a PIP
window 1/9 the size of the screen; two presses display a 1/16-size
window).
1/9 1/16
PIP
7
3. Press PIP CH to change the PIP channel. Press Channel
yz
to change the main channel.
To display an external source in the PIP window:
1. Connect the external equipment to the ANT-1 connection on
the TV.
Note: An ANT-2 source will not display as a PIP. For connection
information, see "Connecting your TV" on page 7.
2. Turn on the TV and select the program/source you want to watch
in the main window.
3. Press PIP (one press to display a PIP window 1/9 the size of the
screen; two presses to display a 1/16-size window).
4. Press SOURCE to select the PIP input source (TV, VIDEO 1,
VIDEO 2, or VIDEO 3). The current source will display
on-screen in green.
PIP
TV
VIDEO1
VIDEO2
VIDEO3
TO SELECT PUSH SOURCE
To turn PIP off:
Press PIP two or three times, depending on the PIP window size
you selected.

Switching the main and small pictures

With the TV in PIP mode, repeatedly press SWAP to switch the
main and small pictures back and forth.
Note:
The PIP window will not open when a
ColorStream (component video) source is
being viewed.
LIGHT
TV
CABLE
MUTE TV/VIDEO TIMER
VCR
2
1
4 5
7 8
100 0
yz
ADV/
PIP CH
FAV
ENTER
ADV/
PIP CH
STOP SOURCE
REC TV/VCR REW
STILL LOCATE SWAP
CT-9946
28
RECALL POWER
3
CH CH (Channel)
6
9
VOL
CH RTN
ENT
FAV
PIP CH
SOURCE
PLAY PIP
PIP
FF
SWAP