Using The Remote Control To Operate Your Other Devices - Toshiba 34HF83 Owner's Manual

Using the remote control to operate your other
devices
If you have a non-Toshiba device or a Toshiba device that the remote
control is not preprogrammed to operate, you must first program the
remote control to recognize the device (if you have not already done
so). See pages 16 and 17.
To use your TV remote control to operate a:
• cable box or satellite receiver, set the Device Switch to CBL/SAT.
• VCR, set the Device Switch to VCR.
• DVD player or HTIB, set the Device Switch to DVD.
+10 (DVD only)
Press to directly access
DVD chapters higher than 10.
TOP MENU (DVD only)
Accesses a DVD's top menu.
Required by some VCRs and cable
converter boxes to change the channel.
Device Switch
Set to "TV" to control the TV; "CBL/SAT" to
control a cable box or satellite receiver;
"VCR" to control a VCR; "DVD" to control
a DVD player or HTIB.
Press during play or record mode to
pause the picture; press again to restart.
TV/VCR (VCR only)
To view one program while recording
another, press to select TV mode.
Rewinds the tape or DVD. (Press during play mode
to view the picture moving rapidly backward.)
REC (VCR only)
Starts tape recording.
Fast-forwards the tape or DVD.
(Press during play mode to view the
picture moving rapidly forward.)
18
Point the remote control
directly at the device.
TV / VIDEO RECALL
INFO
1 2
4 5
8
7
+10
0
100
FAV
MENU
DVDMENU
ENTER
FAV
TV
CBL/SAT CH VOL
VCR
DVD
POP DIRECT CH MUTE
PAUSE
TV/VCR PAUSE STOP
FREEZE SOURCE
REW FF SKIP / SEARCH
CH SCAN SWAP
REC
REW
FF
Note:
Even after the TV remote control is
programmed, it may not operate certain
features on your other device. If this happens
and you wish to use those features, you will
need to use the device's original remote
control.
POWER
POWER
Turns the selected device on and off.
3
INFO (CBL/SAT only)
Displays on-screen information.
6
Channel Numbers (0-9)
Press to directly access channels
9
(as opposed to CH y z).
CHRTN
ENT
GUIDE (CBL/SAT only)
Displays channel guide.
y z x • (DVD only)
Press to navigate DVD menus
(may not work on some DVD players).
CLEAR (DVD only)
Press to reset the title and chapter
number.
CH y z
y selects the next higher channel;
z selects the next lower channel.
SLEEP
PLAY
PLAY
SPLIT
Begins playback of a tape or DVD.
STOP
POP CH
Stops the tape or DVD.
LIGHT
SKIP/SEARCH
Skips forward to later DVD chapters.
SKIP/SEARCH
Skips back to beginning of current DVD
chapter or previous chapters.
(DVD only)
(DVD only)