Using The Remote Control; Preparing The Remote Control For Use; Installing The Remote Control Batteries; Using The Remote Control To Operate Your Other Devices - Toshiba 32AF45 Owner's Manual

Using the remote control

Preparing the remote control for use

With the remote control, you can operate your TV, most VCR and DVD
player models, and cable TV converters together, even if they are
different brands. If you will be using your TV with a Toshiba VCR or
DVD player, your remote control is already programmed and ready to
use. If you own different brands of VCRs, DVD players and/or convert-
ers, you first have to program your remote control. (See "Programming
the remote control to operate your other devices" on page 12.)

Installing the remote control batteries

To install the batteries:
1. Open the battery cover on the back of the remote control.
2. Install two "AAA" size batteries. Match the + and – signs on the
batteries to the signs on the battery compartment.
3. Close the battery cover on the remote control until the lock snaps.

Using the remote control to operate your other devices

To control a VCR:
Program the remote
control to recognize
the brand of your VCR
(see "Programming the
remote control to
operate your other
devices" on page 12).
The buttons shown at
right will then control
the VCR. Press the
VCR button first.
Fast Forward
VCR CH L/M
J3S90121A(E)_P07-16
VCR
POWER
TV VCR CABLE
Power
DVD
1 2 3
+10
4 5 6 100
Channel
Numbers 7 8 9 0
CH +
VOL VOL
MENU/
+
–
ENTER
Channel +/–
CH –
EXIT RECALL TV/VIDEO FAV
CH Enter
VOL CH RTN FAV
RESET CAP/TEXT 1/2 16:9
DISPLAY DVD CLEAR TOP MENU DVD MENU
CODE MTS SLEEP MUTE
Play
REW PLAY FF
Rewind
TV/VCR STOP PAUSE/STILL
TV/VCR
REC VCR CH
Record
DVD SKIP
Stop
Pause/Still
11
Note:
The TV remote control may not operate your
VCR, DVD player, or cable TV converter.
Refer to the owner's manual supplied with the
applicable equipment to see which features
may be available. Additionally, the remote
control for this TV may not support certain
features available on the original remote
controls for such additional equipment, in which
case, it is suggested that you use the original
remote control for the applicable device.
Caution:
• Never throw batteries into a fire.
Notes:
• Be sure to use AAA size batteries.
• Dispose of batteries in a designated
disposal area.
• Batteries should always be disposed of with
the environment in mind. Always dispose of
batteries in accordance with applicable laws
and regulations.
• If the remote control does not operate
correctly, or if the operating range becomes
reduced, replace batteries with new ones.
• When necessary to replace batteries in the
remote control, always replace both batteries
with new ones. Never mix battery types or use
new and used batteries in combination.
• Always remove batteries from remote control
if they are dead or if the remote control is not
to be used for an extended period of time.
This will prevent battery acid from leaking into
the battery compartment.
To control a DVD player:
Program the remote
control to recognize the
brand of your DVD
player (see
"Programming the
remote control to
DVD MENU
operate your other
devices" on page 12).
The buttons shown at
right will then control the TOP Menu
DVD player. Press the
DVD button first.
Fast Forward
DVD Menu
DVD Skip
11
9/03/2005, 5:57 PM
POWER
TV VCR CABLE
Power
DVD
1 2 3
DVD
+10
4 5 6 100
Number
buttons 0
7 8 9
CH +
L/M/ /
VOL VOL
MENU/
Enter
– +
ENTER
CH –
EXIT RECALL TV/VIDEO FAV
Volume
L/M (TV)
VOL CH RTN FAV
DVD Clear RESET CAP/TEXT 1/2 16:9
Display DISPLAY DVD CLEAR TOP MENU DVD MENU
CODE MTS SLEEP MUTE
Play
REW PLAY FF
Rewind
TV/VCR STOP PAUSE/STILL
REC VCR CH
DVD SKIP
Stop
/
Pause/Still