Additional Features; The Timer And Time Display - Informing The Tv To Turn On/Off And Time Display; Panel Lock - Disabling The Buttons On The Front Of The Tv; Stereo And Bilingual Transmissions - Stereo Or Dual Language Broadcasts - Toshiba 32ZP18P, 36ZP18P Owner's Manual

The timer, time display, panel lock
and stereo/bilingual transmissions
The Timer
You can tell the TV to turn itself
certain time.
TIMER
Select the option from the top menu bar.
1
TIMER
Off timer
On timer
0-9 : To set
EXIT : To exit
Select the On timer
2
example, you want the TV to turn ON (or OFF) in
one and a half hours time, enter 01:30 using the
numbered buttons on the remote control.
When setting the On
3
programme position number you want to watch.
You must put the set into Standby mode by
i
pressing the button.
Any equipment connected with Scart leads must
also be put into Standby mode to prevent them
being displayed when the timer switches on.
When the On timer
timer indicator on the front of the TV will be lit
(see page 6).
To cancel the On timer, enter zero in each
4
position including the programme position.
The Time Display
The time display facility allows you to see the
current time on the TV screen.
F
If you press the button and the
remote control whilst watching a normal TV broadcast
you will see a time display from the broadcaster.
It will remain on the screen for about 5 seconds.

ADDITIONAL FEATURES

ON or OFF after a
00:00
01:30 P02
(or the Off timer). If, for
timer, you must enter the
has been set, the GREEN On
t
button on the
Panel lock
allows you to disable the buttons on the
front of the TV set. You can though, still use all of the
buttons on the remote control.
From the
1
lock
and choose ON or OFF with the
S or R buttons.
FEATURE MENU
AV connection
Picture size/position
Teletext
Surround set up
Language
Panel lock
WSS
Stereo and Bilingual transmissions...
If stereo or dual language broadcasts are transmitted the
lights on the front of the TV will be lit. The word Stereo or
Dual will appear on the screen, disappearing after a few
seconds. The display will reappear each time you change
programme positions, provided that the broadcast is in
stereo. If the broadcast is not in stereo the word Mono
will appear.
Choose the required programme number.
1
Press the
2
between
Bilingual transmissions are rare. If they are
transmitted the word
Choose the required programme number and if
1
the word
button to select between
Mono
.
21
Panel Lock
FEATURE MENU
select
ENGLISH
M
Stereo...
I/II button repeatedly, to select
O
Stereo Mono
and .
...and Bilingual
Dual will display.
Dual does appear press the
Dual 1, Dual 2
Panel
ON
ON
I/II
O
or