Transport, Packaging And Storage - WIKA GDM-100-TA Operating Instructions Manual

3. Safety / 4. Transport, packaging and storage
Product label (transmitter)






Model designation

Measuring range

Output signal

Power supply

S# Article No.

P# Product No.

Pin assignment

Date of manufacture


4. Transport, packaging and storage

4.1 Transport
Check the instrument for any damage that may have been caused by transport.
Obvious damage must be reported immediately.
CAUTION!
Damage through improper transport
With improper transport, a high level of damage to property can occur.
▶
When unloading packed goods upon delivery as well as during internal
transport, proceed carefully and observe the symbols on the packaging.
▶
With internal transport, observe the instructions in chapter 4.2 "Packag-
ing and storage".
4.2 Packaging and storage
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change
in installation site, sending for repair).
WIKA operating instructions, models GDM-100-TI, GDM-100-TA
EN


11