Using The Remote Control; Preparing The Remote Control For Use; Installing The Remote Control Batteries - Toshiba 32A43 Owner's Manual

Using the remote control

Preparing the remote control for use

Your TV remote control can operate your TV and most cable converter boxes, satellite receivers, VCRs, DVD players,
and HTIBs (home theater in a box), even if they are different brands.
If you have a Toshiba device:
Your TV remote control is preprogrammed to operate most Toshiba devices. See page 14.
If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed
to operate:
You can program the TV remote control so it will operate the other device. See pages 12–14.

Installing the remote control batteries

1
Remove the battery cover from the back of the remote control.
2
Install two "AA" size batteries, making sure to match the + and –
signs on the batteries to the signs on the battery compartment.
3
Reinsert the battery cover in the remote control until the tab snaps.
Caution:
Dispose of batteries in a designated disposal
area. Do not throw batteries into a fire.
Do not mix battery types or combine used
batteries with new ones.
Squeeze tab
Remove dead batteries immediately to prevent
and lift cover.
battery acid from leaking into the battery
compartment.
If you do not intend to use the remote control
for a long time, remove the batteries.
Note:
If your Toshiba TV remote control does not
operate all the features of your other device,
use the original remote control for that device.
10