Adding And Erasing Channels Manually; Changing Channels - Toshiba 32A43 Owner's Manual

3. Press or to highlight TV/CABLE.
y z
4. Press or to highlight TV (if you use an antenna) or CABLE
x •
(if you use cable).
5. Press to highlight CH PROGRAM.
z
SET UP
LANGUAGE:
[ENGLISH] FRANCAIS ESPANOL
TV/CABLE: [TV] CABLE
CH PROGRAM
ADD/ERASE: [ADD] ERASE
V-CHIP CONTROL
MORE
SELECT [ ]
MOVE [ ]
6. Press or to start automatic channel programming
x •
("CH PROGRAM" displays on-screen). The TV automatically
cycles through every TV or cable channel (depending on which you
selected), and stores all active channels in the TV's memory.
7. When automatic channel programming is complete, the message
"CH Programming Completed" appears.
8. Press CHANNEL ▲▼ to view the programmed channels.

Adding and erasing channels manually

After you have automatically programmed the channels into the TV's
memory, you can manually add and erase individual channels.
To add or erase a channel in the TV's memory:
1. Tune the TV to the channel you want to add or erase. If you are
adding a channel, you will need to use the CHANNEL
NUMBERS to select the channel.
2. Press MENU.
3. Press or to highlight the SET UP menu.
x •
4. Press or to highlight ADD/ERASE.
y z
SET UP
LANGUAGE:
[ENGLISH] FRANCAIS ESPANOL
TV/CABLE: [TV] CABLE
CH PROGRAM
ADD/ERASE: [ADD] ERASE
V-CHIP CONTROL
MORE
[ ] SELECT [ ]
MOVE
5. Press or to highlight ADD or ERASE, whichever function you
x •
want to perform.
6. Press MENU.
7. Repeat steps 1–6 for other channels you want to add or erase,
or press EXIT to return to normal TV viewing.

Changing channels

To change to the next programmed channel:
Press CHANNEL .
y z
To change to a specific channel (programmed or unprogrammed):
Press the CHANNEL NUMBERS (0–9 and 100).
Note: For channels 100 and higher, press the 100 button, and then the next
two channel numbers (for example, to select channel 100, press 100 - 0 - 0;
to select channel 125, press 100 - 2 - 5).
SET UP
LANGUAGE:
[ENGLISH] FRANCAIS ESPANOL
TV/CABLE: [TV] CABLE
CH PROGRAM
ADD/ERASE: [ADD] ERASE
V-CHIP CONTROL
MORE
[ ] SELECT [ ]
MOVE
17
}
Channel
Numbers
MENU
}
stT S
EXIT
Channel yz