Changing Your Pin Code; If You Forget Your Pin Code - Toshiba 32A43 Owner's Manual

5. Use the CHANNEL NUMBERS (0–9) to enter your four-digit
PIN code. After the code is entered, the V-Chip Control menu
appears.
SET UP
ENABLE BLOCKING [Y]
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
[
MOVE
V-Chip Control (Blocking) Menu
6. Press or to highlight ENABLE BLOCKING.
y z
7. Press or to highlight "Y," which enables all blocking by activat-
x •
ing the V-Chip. See "Blocking programs by ratings" on page 21,
"Blocking unrated movies and programs" on page 23.
Note: The "Blocking channels" feature (page 24) is not affected by the
ENABLE BLOCKING setting.
To disable blocking:
Highlight "N" in step 7, above, to deactivate the V-Chip Control
feature and disable blocking.

Changing your PIN code

1. Press MENU.
2. Press or to highlight the SET UP menu.
x •
3. Press or to highlight V-CHIP CONTROL.
y z
4. Press or to display the PIN code entering screen.
x •
5. Use the Channel Number buttons (0–9) to enter your existing PIN
code. After the code is entered, the V-Chip Control menu appears.
6. Press or to highlight NEW PIN CODE.
y z
7. Press or to display the New PIN Code entering screen.
x •
SET UP
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
[ ] [ ]
MOVE SELECT
8. Use the CHANNEL NUMBERS (0–9) to enter a new PIN code.
After the new code is entered, the V-Chip Control menu appears.
9. Press EXIT to return to normal TV viewing.
N
] [ ]
SELECT
SET UP
PLEASE ENTER NEW PIN CODE
_ _ _ _
SELECT [0–9] END [EXIT]
20
RECALL
}
Channel
Numbers
MENU
}
stT S
EXIT

If you forget your PIN code

1. Press MENU.
2. Press
or to highlight the SET
x •
UP menu.
3. Press or to highlight V-CHIP
y z
CONTROL.
4. Press or to display the PIN
x •
code entering screen.
5. While the PIN code entering
screen is displayed, press RECALL
four times within five seconds. The
"Blocking Is Reset" screen appears.
SET UP
BLOCKING IS RESET
PLEASE ENTER NEW PIN CODE
_ _ _ _
SELECT [0–9] END [EXIT]
6. Use the CHANNEL NUMBERS
(0–9) to enter a new PIN code.
After the new code is entered, the
V-Chip Control menu appears.
7. Press EXIT to return to normal TV
viewing.