Using The Locks Menu; Selecting A Password - Toshiba 27D46 Owner's Manual

Using the LOCKS menu

Note: The V-Chip feature is available for the U.S. V-Chip system
only. The Canadian V-Chip system is not supported.
You can prevent others from viewing certain programs or channels by
blocking them using the V-Chip feature.

Selecting a password

Before you can use the V-Chip feature to block programs and
channels, you must select a password. The password you select
prevents others from changing the rating limits you set.
To select your password and access the LOCKS menu:
1. Press MENU, then press
2. Press L or M to display the password entering mode.
L O C K S
N E W PA S S W O R D
[ 0 - 9 ] : S E L E C T
3. Use the Channel Number buttons (0-9) to enter your password.
If you are accessing the LOCKS menu for the first time, select a
four-digit number to be your password. Press ENTER.
L O C K S
N E W PA S S W O R D
[ 0 - 9 ] : S E L E C T
4. Enter the password again to confirm it, and then press ENTER.
The LOCKS menu appears.
L O C K S
C O N F I R M PA S S W O R D
[ 0 - 9 ] : S E L E C T
5. You may now set up the LOCKS menu. See "Using the V-Chip
(parental control) feature" (page 23), "Locking channels" (page 24),
"Locking the video inputs" (page 25), "Setting the GameTimer
(page 25), and "Using the front panel lock feature" (page 26.)
To change your password:
1. Press MENU, then press
2. Press L or M to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password.
Press ENTER. The LOCKS menu appears.
4. Press L or M to highlight NEW PASSWORD and press
display the NEW PASSWORD menu.
5. Use the Channel Number buttons (0-9) to enter a new code.
Press ENTER.
6. Enter the password again to confirm it, and then press ENTER.
7. Press EXIT to return to normal viewing.
J3W41121A(E)_P22-30 22
or to highlight the LOCKS menu.
- - - -
E N T E R : S E T
E X I T : E N D
E N T E R : S E T
E X I T : E N D
E N T E R : S E T
E X I T : E N D
or to display the LOCKS menu.
TM
"
or to
22
14/03/2006, 3:36 PM
Channel
Numbers
Menu/
Enter
Exit