Locking Video Inputs - Toshiba 27AF62 Owner's Manual

5. Use the CHANNEL NUMBERS (0–9) to enter your four-digit
PIN code. After entering the code, the V-Chip Control menu
appears.
6. Press or to highlight BLOCK CHANNEL.
y z
7. Press or to display the BLOCK CHANNEL menu.
x •
SET/CLEAR will be highlighted.
8. Press or to highlight CLEAR.
x •
9. Press to clear all blocked channels from the list.
z
10. Press EXIT.

Locking video inputs

You can use the Video Lock feature to block the input sources
(Video 1, Video 2, Video 3, and ColorStream) and channels 3 and 4.
Note: The Video Lock feature is independent of the Enable Blocking
option of V-Chip control (page 21).
The Video Lock options are:
Video: Blocks Video 1, Video 2, Video 3, and ColorStream.
Video+: Blocks Video 1, Video 2, Video 3, ColorStream, and
channels 3 and 4.
Off: Disables the Video Lock feature.
To set up video lock:
1. Press MENU.
2. Press or to highlight the SET UP menu.
x •
3. Press or to highlight V-CHIP CONTROL.
y z
4. Press or to display the PIN code entering screen.
x •
5. Use the CHANNEL NUMBERS (0–9) to enter your PIN code.
After entering the code, the V-Chip Control menu appears.
6. Press or to highlight VIDEO LOCK.
y z
7. Press or to select the desired level of video locking (Video,
x •
Video+, or Off ).
SET UP
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK VIDEO VIDEO+ [OFF]
[ ]
MOVE [ ] SELECT
8. Press EXIT.
LIGHT RECALL POWER
TV
CABLE
MUTE TV/VIDEO TIMER
VCR
2 3
1
CH
4 5 6
9
7 8
VOL
CH RTN
100
0 ENT
ADV/
PIP CH
FAV ENTER FAV
ADV/
PIP CH
Note:
In normal TV viewing, if you cannot access the
input sources (Video 1, Video 2, Video 3, and
ColorStream) or channels 3 and 4, check the
Video Lock setting and highlight OFF if
necessary.
Channel
Numbers
MENU
EXIT
25