Table of Contents
Advertisement
Working with LA-Stick 4x4
A
B
Manual LA-Stick 4x4 - 2018-07 EN
Mounting the tiltable stand adapter
max. load: Two LA-Sticks with spindle mechanics.
1.
Remove the two M6 countersunk screws (C) and mount the
adapter firmly to the LA-Stick.
2.
Tighten clamping screw (B) to secure the position of the ad-
apter on the stand or spacer rod. We recommend: Tripods or
C
rods with „Ring Lock".
3.
To adjust the inclination of the adapter, loosen the wing nut (A)
and then tighten it again.
Mounting the tilting and swivelling wall bracket
max. load: Four LA-Sticks with spindle mechanics.
1.
When mounting the wall bracket to the wall, follow the manu-
facturer's operating instructions.
2.
Remove the two M6 countersunk screws (C) and attach the
swivel bracket of the wall bracket firmly to the LA-Stick.
3.
Hang the swivel bracket (with mounted loudspeaker) into the
wall bracket.
4.
Screw parts together using the lower carriage bolt, washer and
lock nut. Adjust the inclination on the scale and retighten the
upper screw connection.
Mounting the ceiling bracket
max. load: Four LA-Sticks with spindle mechanics.
1.
When mounting the ceiling plate of the bracket to ceilings, fol-
low the manufacturer's operating instructions.
2.
Remove the two M6 countersunk screws (C).
3.
Fix the ceiling bracket to the LA-Stick with two M6 hexagon
socket head screws and washers.
4.
Attach ceiling bracket with LA-Stick to the ceiling panel and set
the desired inclination and direction.
Mounting the wall bracket
max. load: One LA-Stick. If overloaded, the housing cover may
break off!
1.
When mounting the wall bracket to the wall, follow the manu-
facturer's operating instructions.
2.
Remove the M10 countersunk screw on the top of the LA-Stick
and mount the rotary and swivel axis there.
3.
Attach the rotary and swivel axis to the wall bracket with
LA-Stick and set the desired inclination and direction.
Page 12 of 14
Advertisement
Table of Contents
