Adding Channels To The Tv's Memory; Programming Channels Automatically; Adding And Erasing Channels Manually; Changing Channels - Toshiba 27A35C Owner's Manual

Adding channels to the TV's memory

When you press CH +/- on the remote control or CHANNEL ▼/▲ on
the TV front panel, your TV will stop only on the channels stored in the
TV's channel memory. Follow the steps below to program channels into
the memory.

Programming channels automatically

Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase specific channels manually.
To add channels automatically:
1. Press MENU, then press
2. Press or until the TV/
CABLE selection is highlighted.
3. Press or to highlight either TV
or CABLE, depending on which
you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press to select CH PROGRAM.
5. Press or to start channel programming. The TV will automati-
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW-PLEASE WAIT" appears.
6. When channel programming is complete, the message "COMPLETED"
appears.
7. Press CH + or – to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add
or erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If you are adding a channel, you must select the channel using the
Channel Number buttons.
2. Press MENU, then press
to display the SETUP menu.
3. Press or to highlight ADD/
ERASE.
4. Press or to select ADD or
ERASE, whichever function you
want to perform.
5. Repeat steps 1–4 for other
channels you want to add or erase.

Changing channels

To change to the next programmed channel:
▲/ ▼
Press CHANNEL
remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100) on the remote
control.
For example, to select channel 125, press 100, 2, 5.
3U50101A(E)_P07-13 13
or to display the SETUP menu.
CH
PICTURE AUDIO SETUP OPTION
TV / CABLE TV CABLE
CH PROGRAM START
ADD / ERASE ADD
SELECT ADJUST
or
CH
PICTURE AUDIO SETUP OPTION
TV / CABLE CABLE
CH PROGRAM START
ADD / ERASE ADD ERASE
SELECT ADJUST
on the TV front panel or CH +/– on the
13
3/31/05, 6:18 PM
Channel
Numbers
Channel +/–
Menu