Petzl REACTIK + Quick Start Manual page 2

rechargeable battery.
EN
For use in remote areas, the rechargeable battery
can be replaced by a standard battery case (not
These Instructions for Use are inseparable from the
included).
international regulations found in the MyPetzl Light
application and at Petzl.com. General info on Petzl
lamps and batteries
Nomenclature
(1) Light sensor, (2) White LED for spot beam, (2
A. Rechargeable battery precautions
bis) White LED for flood beam, (2 ter) Red LED,
Warning, incorrect use can damage the
(3) Rechargeable battery, (4) Port with protective
rechargeable battery.
cover for USB A/Micro B cable, (5) USB A/Micro
- Do not submerge the rechargeable battery
B cable, (6) Energy gauge or Bluetooth activation
in water.
indicator (blue).
- Do not put the rechargeable battery in a fire.
- Do not destroy the rechargeable battery, it can
REACTIVE LIGHTING
explode or release toxic materials.
technology
- If your rechargeable battery is damaged, do not
dismantle it or change its structure.
The lamp features REACTIVE LIGHTING
- If your rechargeable battery is deformed or
technology. The lamp's integrated light sensor
cracked, dispose of it in a recycling bin.
instantly and automatically adapts the shape
B. Lamp precautions
and power of the beam. REACTIVE LIGHTING
technology gives you the benefit of optimal lighting
The lamp is not recommended for children.
for your activities, while ensuring the minimum
Eye safety
chosen battery life.
The lamp is classified in risk group 2 (moderate
For biking, use your lamp with CONSTANT
risk) according to the IEC 62471 standard.
LIGHTING technology (risk of switching off with
- Do not look directly at the lamp when lit.
REACTIVE LIGHTING technology).
- The optical radiation emitted by the lamp can
Lamp operation
be dangerous. Avoid aiming the lamp's beam into
another person's eyes.
Switching on & off, selecting - Risk of retinal damage from the emission of blue
light, particularly in children.
When you turn on your lamp, it normally turns on
with REACTIVE LIGHTING technology (if you lock Electromagnetic compatibility
your lamp after using red light it normally turns
Meets the requirements of the 2004/108/CE
on in red).
directive on electromagnetic compatibility.
When switching between REACTIVE and
Warning, an avalanche beacon in receive (find)
CONSTANT technologies, the lamp always turns
mode can experience interference when in
on in MAX AUTONOMY mode.
proximity to your headlamp. In case of interference
With REACTIVE LIGHTING technology:
(indicated by static noise from the beacon), move
- When the sensor detects an area with
the beacon away from the headlamp.
sufficient light, your lamp will blink dimly for two
C. Cleaning, drying
minutes, then automatically turns off to conserve
rechargeable battery life. If used in a damp environment, remove the battery
from the lamp and dry the lamp case with the USB
MyPetzl Light Bluetooth® mobile
port cover open. In case of contact with seawater,
application - customizing your lamp.
rinse the lamp in fresh water and dry it.
Access to the battery's charge level; to the lamp's
If your lamp is dirty, clean it with a damp cloth
remaining burn time in hours and minutes; to
and let it dry.
customizing lamp performance depending on
Do not allow chemicals to come into contact with
the activities, according to six preset profiles:
your lamp.
multi-activity, camping-backpacking, trail running,
D. Storage
caving, trekking and mountaineering.
By default, the lamp comes with Bluetooth For long-term storage, recharge the rechargeable
activated. battery (repeat every six months) and remove
The Bluetooth® mark and logo are registered the battery from the lamp. Avoid allowing your
trademarks of Bluetooth SIG Incorporated and are rechargeable battery to discharge completely. Be
used under license by Petzl. sure to store your rechargeable battery in a dry
Attention: requires iOS 7 or later, or Android 4.3 place. The ideal storage temperature is between
or later. 20 and 25° C.
After 12 months in these conditions without use,
Charging the
the rechargeable battery will be discharged.
rechargeable battery E. Protecting the environment
The lamp comes with a Petzl Li-Ion rechargeable F. Modifications/repairs
battery. Capacity: 1800 mAh
Prohibited outside of Petzl facilities, except
Charge it completely before first use. replacement parts.
Use only a Petzl ACCU REACTIK+
G. Questions/contact
rechargeable battery.
The Petzl guarantee
In general, Li-Ion rechargeable batteries lose 10
% of their capacity each year. After 300 charge/ This lamp is guaranteed for 3 years against any
discharge cycles, they still have about 70 % of their defects in materials or manufacture (except the
initial capacity. rechargeable battery, which is guaranteed for one
year or 300 cycles). Exclusions from the guarantee:
Charging the battery
more than 300 charge/discharge cycles, normal
Recharge only with a USB 5 V charger, for
wear and tear, oxidation, modifications or
example:
alterations, incorrect storage, poor maintenance,
- Computers (they must be turned on and in use).
damage due to accidents, to negligence, or to
- Solar panels with a USB 5 V output (preferably
improper or incorrect usage.
panels delivering at least 5 W or 1 A for faster
Responsibility
charging). Warning, protect the sensor's lens
from overexposure to the sun to avoid damaging
Petzl is not responsible for the consequences,
the sensor.
direct, indirect or accidental, or any other type
- Portable power supply.
of damage befalling or resulting from the use of
Warning its products.
Recharge only with a USB cable of less than 3 Marking
meters in length. The charger's output voltage
(a) Model.
must not exceed 5 V. Use only a CE/UL approved
(b) Rechargeable battery serial number.
charger.
(c) International certifying bodies.
The USB external power supply connected to your
(d) Turning on or off.
product must be a SELV type and be a limited
(e) Conforms to European requirements: Petzl
power source as defined in chapters 2.2 and 2.5
declares that this product conforms to the essential
of the standards IEC 60950-1 ed.2.2 and EN
requirements and other relevant provisions of the
60950-1 : 2006+A11 : 2009+A1 : 2010+A12 :
1999/5/CE, 2004/108/CE, 2006/95/CE Directive.
2011+A2 : 2013.
The declaration of conformity can be found at
When charging, the power plug should remain
Petzl.com
easily accessible.
(f) Product designed and manufactured with high
Recharge time
quality materials and components that can be
Recharge time is 5 hours with the USB charger, recycled and reused.
or a computer. Attention, if many USB devices are (g) Management of electrical and electronic
connected to your computer, the charging time can equipment waste.
increase (up to 24 hours).
While charging, the energy gauge blinks green, FCC/IC informations
changing to steady green when charging is The device complies with FCC and IC radiation
complete, and steady red in case of malfunction. exposure limits set forth for general population.
This device must not be co-located or operating in
Replacing the rechargeable battery
conjunction with any other antenna or transmitter.
Use only a Petzl ACCU REACTIK+ rechargeable
The device complies with Part 15 of the FCC Rules
battery. Using another type of rechargeable battery
and with Industry Canada licence-exempt RSS
can damage your lamp. Do not use another type of
standard(s). Operation is subject to the following
two conditions : (1) this device may not cause
harmful interference, and (2) this device must
accept any interference, including interference
that may cause undesired operation. Note : This
equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct interference
by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on
circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio /TV
technician for help.
IC : Under Industry Canada regulations, this radio
transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved
for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the
antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.p.)
is not more than that necessary for successful
communication.