K-FEE SQUARE Operating Manual page 39

3b
Press the milk button to activate the
4
rinsing process. The milk button will blink
during the rinsing process, and all the
button symbols will illuminate when it is
complete.
4
WARNING Very hot water –
scalding hazard.
Empty the collecting container after-
5
wards. The appliance is ready for use.
5
NOTE
On this appliance, the milk
button is also used to activate
the rinsing process. You should repeat
the complete rinsing process 4 times
before using the appliance for the fi rst
time. To do this, press the milk button
again after each rinsing process.
INFO
The rinsing button will illu-
minate after the appliance
has heated up each time you start
the appliance up from cold. Please
rinse once.
The appliance is immediately ready
for use once it has been heated up to
brewing temperature when started up
from hot.
11