Poe Settings - NEC UX5000 Manual

UX5000
___________________________________________________________________________________
S 5 P
ECTION O
The Power over Ethernet Configuration screen allows users to manage and configure
Power over Ethernet settings. The following assignments can be made for each port:
❑
❑
❑
❑
❑
___________________________________________________________________________________
Gigabit PoE Switch Manual
E S
ETTINGS
Admin State – Indicates whether PoE is enabled or disabled on the port.
Priority – Priority Indicates the PoE Priority setting of the port. The possible
values are Critical, High, Low (default).
GSWU Cards in Chassis – Refer to
determine the maximum power per blade.
Device Class Specifications –
determines Class Marking.
Table 5-2 IEEE802.af Class Specifications
IEEE802.3af
Class 4
Class 3
Class 2
Class 1
Class 0
Power (mW) – Power consumption in milliWatts. Indicates the amount of power
consumed by the device.
For additional information on the amount of watts
consumed by NEC Terminals. Reference the UX5000
Hardware Manual, P/N 0913100.
Table 5-1 Maximum Power – Blades
Table 5-1 Maximum Power – Blades
Maximum Power
Blade(s)
(Each Blade)
1
2
3
Table 5-2 IEEE802.af Class Specifications
Minimum
–
6.49W
3.84W
0.44W
0.44W
90W
45W
30W
Maximum
–
12.95W
6.49W
3.84W
12.95W
Revision 1
to
5 - 7