Table of Contents
Advertisement
Should any problem occur with the unit, use the following simple tests to determine
whether or not servicing is required.
PROBLEM
The handset battery pack
does not charge.
Battery pack becomes low
quickly.
Can not make or
receive calls.
Can not hear dialtone.
Low battery blinks on the
display.
TROUBLESHOOTING
• The charging contacts of the handset and base are not clean.
→ Clean them with a dry cloth.
• The battery is not connected with correct polarity.
→ Install the battery pack correctly.
• The battery is several years old.
→ Replace with a new battery.
• The battery was not fully charged at the initial charging.
→ Charge the battery for 12-16 hours without any
interruption.
• The battery is several years old.
→ Replace with a new battery.
• The AC adaptor of the base unit is disconnected.
→ Plug the AC adaptor into the base unit and the AC 120V outlet.
• The battery is low.
→ Place the handset on the base unit to recharge.
• Telephone line cord is disconnected.
→ Check both ends of the telephone jack.
• The previous call was not disconnected.
→ Press
to disconnect the line.
TALK
• Trouble with the telephone line.
→ Check an extension line.
• Outlet used is controlled by a wall switch in its OFF position.
→ Relocate it to another outlet.
• The handset is too far from the base unit.
→ Bring the handset near the base unit.
• Dial setting needs to be changed.
→ Press and hold
FLASH
setting.
• The battery is low.
→ Return the handset to the base.
SOLUTION
key then choose the appropriate
35
Advertisement
Table of Contents
