Table of Contents
Advertisement
Advanced
Banner time
5V for active
antenna
OTA software
update
System Info
Card Info
Factory reset
Select the number of seconds the info banner is displayed
when you change channel. Maximum time for displaying the
information banner is 10 sec.
Select "On" if you have connected an active digital terrestrial
antenna that needs 5V DC power through the antenna socket
on the set-top box.
OTA software update
Select
top box will be updated if new software available. If new
software is unavailable you will get a message telling you so.
Technical information about software and hardware
implemented.
You get access to information from the inserted smart card.
Factory reset
Select
factory settings. You will be asked to enter your PIN number
before you can select
set-top box to factory settings.
27
and the software of your set-
if you want to bring all settings back to
OK
to confirm that you want to reset the
Advertisement
Table of Contents
