Power The Radio - PERFECTPRO DAB+MATE Operating Instruction

Power the radio

1. Installing the batteries, first turn battery cover fixture anti-clockwise to loosen and open the battery
cover.
Note:
Before you insert the batteries, if you use non-rechargeable batteries, make sure the NiMH/Alkaline
switch is switched to Alkaline position.
2. Insert 6 x C size (UM-2) batteries into the compartment. Ensure the batteries are completely inserted
in accordance with the diagram shown. Close the battery cover and fasten the fixture by turning
clockwise. Reduced power, distortion and a stuttering sound or "Battery Low" showing on the LCD
display are all signs that the batteries need replacing or recharging (see below Charging the batteries).
Run time of the radio on batteries varies strongly depending on the quality and capacity (mAh) of
the batteries, temperature, volume level etc.
3. AC Operation
Before plugging the AC power cord into the AC socket, be sure the voltage is correct. If you have
batteries in the radio and connect AC power cord into the AC socket, the batteries will automatically
be disconnected.
Power cord storage is designed to store the cord when the radio is not in use.
6