Installation Instructions CZ-640 massage chair arrives in two boxes. THIS SIDE UP Calibrated Instument Please Do Not Drop Calibrated Instument Please Do Not Drop Box 1 of 2 Base & Color: BOX 2 OF 2 Espresso & Backrest Color: ESPRESSO & Midnight...
Page 3
Connect footrest to base. Move the footrest close to the chair. Engage the link rod with the footrest joint, then insert the bolt and lock with the cotter pin. Remove the cotter pins and bolts from the chair base. Locate the two cotter pins and bolts on the chair base.
Page 4
Attach the remote control holder. First, secure the holder with the 3 screw nuts, Next, tear the adhesive Here is what the eight pin connectors look like. of the film and stick to the slot shown in the picture below. Then place the touch pad into the holder. Here is what is should look like with all wires connected.
Need help?
Do you have a question about the CZ-640 and is the answer not in the manual?
Questions and answers