LEGRAND Kenall LUXTRAN LTSIU Series Installation Instructions
LEGRAND Kenall LUXTRAN LTSIU Series Installation Instructions

LEGRAND Kenall LUXTRAN LTSIU Series Installation Instructions

Luminaires for tunnel applications

Advertisement

LUXTRAN
Luminaires for Tunnel Applications
LTSIU SERIES
The LuxTran LTSIU series luminaires contains sensitive electronics. Take care to avoid damage by improper handling or
static electricity discharge (ESD). Either type of damage could render the system inoperable or cause latent failure.
INSTALLATION INSTRUCTIONS
1. Secure fixture to wall or ceiling using user supplied hardware. Slots for 3/8 bolts are provided in the mounting
brackets. See Figure 1.
.44
.94
10.0
Figure 1a
NOTE: If the fixture has directional optics, note the label indicating the direction of light and install appropriately.
25.5
www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United State swith more than 50% of the component cost of US origin It may be covered by patents
found at www.kenall.com/patents. Content of speci cation sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg. Co.
INSTALLATION INSTRUCTIONS

IMPORTANT SAFEGUARDS

When using electrical equipment, basic safety precautions
should always be followed, including the following:
THIS PRODUCT MUST BE INSTALLED IN
ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR
WITH THE CONSTRUCTION AND OPERATION OF
THE PRODUCT AND THE HAZARDS INVOLVED.
CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE
CODE D'INSTALLATION PERTINENT, PAR UNE
PERSONNE QUI CONNAÎT BIEN LE PRODUIT
ET SON FONCTIONNEMENT AINSI QUE LES
RISQUES INHÉRENTS. DISCONNECT POWER TO ALL
CIRCUITS BEFORE WIRING FIXTURE. INSTALL IN ACCORDANCE
WITH ALL NATIONAL, STATE, AND LOCAL CODES. DO NOT
CONNECT TO AN UNGROUNDED SUPPLY. READ ALL FIXTURE
MARKINGS AND LABELS TO ENSURE CORRECT INSTALLATION
OF FIXTURE. SUPPLEMENTAL INSTRUCTIONS MAY BE LOCATED
ON THE FIXTURE, IN ADDITION TO THIS INSTRUCTION SHEET,
REGARDING ORIENTATION, OR MOUNTING RESTRICTIONS.
SAVE THESE INSTRUCTIONS
.41
.91
4.00
9.75
Figure 1b
Figure 1
25.37
LTSIU_F-5445_091118
1
20°
20°
5.95

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Kenall LUXTRAN LTSIU Series and is the answer not in the manual?

Questions and answers

Summary of Contents for LEGRAND Kenall LUXTRAN LTSIU Series

  • Page 1 LUXTRAN ™ INSTALLATION INSTRUCTIONS Luminaires for Tunnel Applications LTSIU SERIES IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed, including the following: THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
  • Page 2 INSTALLATION INSTRUCTIONS 2. Rotate latches and open door, which is retained by stainless steel cables. 3. Loosen wing nuts and remove Wiring Cover. See figure 2. Figure 2 4. Connect weather tight electrical service to 7/8 dia. opening provided. Figure 2 5.
  • Page 3 INSTALLATION INSTRUCTIONS To replace LED modules- 1. Open door, which is retained by stainless steel cables. 2. Loosen wing nuts and remove Wiring Cover. See Figure 2. 3. Remove reflectors and disconnect LED module leads. See Figure 4. 4. Remove screws securing LED module. Figure 4 5.
  • Page 4 INSTALLATION INSTRUCTIONS Purple 216L Wiring DIMMING (+) 188L/216L Wiring Diagram Gray DIMMING (-) BLUE Blue GREEN Green WHITE White Blue LED Module COPPER Black BLACK Blue Drivers Purple DIMMING (+) Gray DIMMING (-) White BLUE Blue Green White Blue LED Module WHITE Black BLACK...
  • Page 5 INSTALLATION INSTRUCTIONS CUSTOMER SERVICE For technical assistance, call 1-800-4KENALL (1-800-453-6255). WARRANTY For warranty information visit www.kenall.com/Resources/Certified-Performance-Warranties www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA This product complies with the Buy American Act: manufactured in the United State swith more than 50% of the component cost of US origin It may be covered by patents found at www.kenall.com/patents.

Table of Contents