Setting The Front Light; Setting Power - Toshiba 2032SP Online User's Manual

Note:
You can automatically receive a call when the Auto-Answer is
activated. However, you cannot disconnect without entering the
password.

Setting the Front Light

Tap , then . On the
1. Settings
Set the Front Light.
2.
Set the time that elapses until the front light automatically turns off if
the device is not used.
When finished, tap .
3. OK
Note: If the remaining battery power decreases, the brightness level
may be lower than the selected setting.
Section 2: Understanding Your Device
48 2A: Your Device - The Basics
tab, tap .
System Front Light

Setting Power

To confirm and control power usage:
Tap , then . On the
1. Settings System
Set Power Options.
2.
When the AC Adapter is used, the battery charging mode is displayed,
but the remaining battery power is not displayed.
Set the time that elapses until the power automatically turns off if the
device is not used.
When finished, tap .
3. OK
Section 2: Understanding Your Device
tab, tap .
Power
2A: Your Device - The Basics 49