PERFECTPASS StarGazer Manual page 10

Press DOWN key to access the New Jumper and Crew Weight
3. Menu Arrow
Press UP key to change modes or mode settings:
Press DOWN key to Calibrate system:
4. Speed/SETPOINT
The speed readout will turn into the SETPOINT when the engine is below 1500 RPM or the
Speed/SETPOINT is highlighted. When this is highlighted the metric conversion will appear in
this area of the screen.
Press UP or DOWN keys to select desired SETPOINT.
Press the UP key to enter a new jumper or
DOWN key to enter or edit the crew
weight. New Jumper is covered below.
Enter the Crew Weight in pounds using the
UP and DOWN keys. Press the MENU
key to confirm and continue.
This allows you to change modes and
mode settings. The Additional Jump
Settings will be discussed below.
The calibration screen is described
below in this section.
8