Section 2: General Information Specifications; Serial Number Location; Unit Dimensions - Generac Power Systems PV Link Installation Manual

Section 2: General Information
Specifications
Description
Rated power
Peak efficiency
MPPT input voltage
Rated power input voltage
Maximum input voltage
Maximum output voltage
Nominal output
Maximum output current
Standby power
Topology
Protections
Maximum operating temperature
Enclosure
Weight
Specifications are subject to change without notice. Refer to the product specification sheet for complete list.

Serial Number Location

Refer to Figure 2-1 to locate the unit serial number and
RCP number (A). Record the information from this tag in
Table 1: Generac PV Link Important Information
the inside front cover of this manual so it is available if
the tags are lost or damaged. When requesting
assistance, you may be asked to provide this information.
A
Figure 2-1. Serial Number Location
Installation Manual for PV Link
Units
W
%
VDC
VDC
VDC
VDC
-
A
W
-
-
ºF (ºC)
-
lb (kg)

Unit Dimensions

on
A
A
B
010121
C
S2502
2500 (continuous)
99
60–360
200–360
420 (absolute maximum)
420 (open circuit)
REbus DC nanogrid (380 VDC + data)
8
<1
Boost converter
Ground-fault protection, arc-fault protection
158 (70)
Type 3R
7.3 (3.3)
r
B
Figure 2-2. Unit Dimensions
9.6 (243)
15.4 in (390 mm)
2 in (50 mm)
General Information
C
009955
5