Page 4
Thank you For your safety for choosing a Loewe product. We are happy to have you as a customer. For your safety and to avoid unnecessary damage to your TV set, please read and At Loewe, we combine the highest standards of technology, design and user- observe the following safety instructions: friendliness.
Page 5
Subwoofer 200 setup Basic information Loewe TV set • Place the unit on a stable, even surface. • The distance between the subwoofer and audio source must not exceed 10 m in the same room. Loewe Subwoofer •...
Page 6
Connection Cabling of Loewe TV set (chassis SL2xx) – Subwoofer 200 – speaker Connect the speaker cable to the speaker according to the corresponding installa- ➠ The TV set must be equipped with a Digital Audiolink. tion instructions. One of the two wires is usually marked black. Connect this black...
Page 7
(e.g. Loewe MediaVision 3D). If you connect the subwoofer via the Audiolink cable, to the red terminals. install it with the 26-pole connector at the Loewe TV set and at the subwoofer (socket Audiolink Use the mains cable supplied to connect the 220-240 V socket of the subwoofer to a 220-240V 50/60 Hz socket.
After switching on the subwoofer for the first time, it is automatically switched on and off together with the Loewe TV set. ➠ The rotary switches Crossover Frequency...
Technical Data Masthead Loewe Subwoofer 200 Order no. 50212T/U/W Loewe Opta GmbH is a public limited company of German law with its Head Operating temperature [°C] 5 ... 40 Office in Kronach. Humidity [%] (no condensation) 30 ... 90 Dimensions [W x H x D in cm] 24 x 24.5 x 26.1...
Need help?
Do you have a question about the Audiodesign Subwoofer 200 and is the answer not in the manual?
Questions and answers