Advertisement
6. Installation of data aggregation device (Beehive)
Ethernet cable
RS485 cable
Notes for Operation:
1. The protection grade of the Beehive is IP20 and needs to be installed indoors. If it
needs to be installed outdoors, please add a waterproof box.
2. Connect power, ethernet cable or third-party device to the corresponding terminals.
3. Test whether the Swarm and the network cable work normally (select"FIND 485"in
the menu of the Beehive, press "OK", then the connection number of the 485
devices will be displayed)
Modbus
Device A
100~240V
Power cord
Modbus
Device B
A third-part device
Advertisement
