Inserting the batteries
Batteries are included with your Lactate Scout+.
Two LR03 / AAA (1.5 V) batteries must be
inserted prior to the initial use of your Lactate
Scout+. Alkaline or zinc carbon batteries can
be used. Only use batteries of the same type.
If the time to replace the batteries exceeds
one minute, the date and time setting will be
lost and must be re-entered (see page 20). The
stored data and settings will be kept, however.
The Lactate Scout+ must be turned off to
replace the batteries. Gently, push the battery
cover outward. Remove the used batteries.
When inserting the new batteries, ensure that
the polarity is correct (+/-). The batteries must
be inserted in the same direction. Push the
battery cover back until it snaps into place.
Attention:
In the case of prolonged periods
of non-use and when flying, the batteries must
be removed.
7
Please note: Used batteries must not
be disposed of with household waste.
Return them to the shop or any public
collection point.
Need help?
Do you have a question about the Lactate Scout+ and is the answer not in the manual?