MTI BASICS Series Owner's Manual page 2

A N D I N S T A L L A T I O N G U I D E
Thank you for choosing the MTI BASICS ® Foot Spa. You have
purchased the best-built acrylic foot spa in America. We know it will
give you many years of pleasure. The instructions in this booklet will
provide you with the information you need to install and operate this
unit. This information is also available on mtibaths.com. Our customer
service department is available to answer any additional questions
you may have pertaining to the installation and operation. Call
800-783-8827 to speak to our Service Department. For faster service,
please have your warranty registration number (serial number) ready
when calling. The registration number can be found on the CSA/UL
label adhered to the exterior surface of the foot spa. This sticker is
typically placed several inches above the pump.
I M P O R TA N T S A F E T Y
I N S T R U C T I O N S
WARNING: WHEN USING ELECTRICAL PRODUCTS, BASIC PRECAUTIONS
SHOULD BE FOLLOWED, INCLUDING THE FOLLOWING
This manual contains information and instructions for proper operation and maintenance of your
whirlpool. Failure to follow these instructions could result in personal injury, electrical shock or fire.
INSTRUCTIONS PERTAINING TO RISk OF FIRE, ELECTRIC SHOCk, OR INJURY TO PERSONS.
READ AND FOLLOW ALL INSTRUCTIONS
PRECAUTIONS
▲
!
Do not stand in the basin of the pedicure spa!
▲
!
Excessive water temperature is dangerous and should be checked before use. Maximum
operating water temperature should not exceed 104˚ F (41˚ C).
▲
!
Always enter and exit the pedicure spa slowly and carefully.
▲
! Never bring or operate any electrical devices into or near the pedicure spa.
O W N E R ' S M A N U A L