2
Click [Start Discovery] to begin the process.
It locates all the compatible devices in your network.
You can quit the process by clicking [Stop Discovery].
When this equipment is on another segment, it may not be discovered. In this case,
click [Manual Selection] to discover the equipment manually.
P.73 "Configuring the connection by manual selection"
If the process continues for a long time, it is because the too many network clients are
in the network. In this case, you can configure the discovery settings from [Advanced]
button.
P.72 "Configuring discovery settings"
3
When the process completes, found printers are listed in the list.
4
Select the device that you want to access from the list and click
[OK].
The Address Book Viewer window is displayed.
Managing Address Book
71