Advertisement
Available languages
Available languages
GB
ROXXON DIVIDING HEAD UT 400
In general
As already implied by the name, dividing heads are suitable for manufacturing divisions
on work pieces: typical examples are toothings or pitch circles. These may be regular or
irregular; the CNC programming offers you all the necessary liberties: all positions can be
approached by computer control.
Positioning accuracy is 0.003°, which suffices for the most precise applications. The
reference position is recognised when it passes a light barrier.
The clamping device holder of the dividing head is co-ordinated to the accessories of the
Proxxon accessories programme. For example, it is possible to use all lathe chucks that
we also offer for our lathes, but also, e.g., our face plate. A small selection:
Article number:
24407
24408
24410
More information on our entire comprehensive accessories programme for your UT 400
CNC is available in our device catalogue or at www.proxxon.com.
The feed receiver is driven by a powerful stepping motor (2 A) whose toothed belt ratio
and worm gear provide an enormous torque.
The dividing head is designed for use with our FF 500 CNC finishing miller. The supplied
CNC software includes the option of programming the 4
the controls have only been prepared to operate the CNC dividing head as of September
2009. Previous models will have to be retrofitted with a so-called driving stage by the
factory. To clarify the details, please contact our Customer Service
(technik@proxxon.com).
Scope of delivery:
1. Dividing head with cabling
2. Mounting parts
3. Packaging (not pictured)
4. Operating instructions (not pictured)
Designation:
3-jaw chuck, centrically clamped
4-jaw lathe chuck, centrically clamped
4-jaw lathe chuck with individually adjustable jaws
th
axis. Please note, however, that
Seite 10
Advertisement
