Fiat F500-F65-3 User Manual - Original Instructions page 16

scrapped.
The kickscooter must be disconnected from the supply mains when
removing the battery.
Only the original charger must be used. Please refer to your retailer
in case replacement is required.
CAUTIONS
Do not use the kickscooter if the battery is low.
Do not use the kickscooter in case of burning smell.
Do not use the kickscooter if anything leaks out from the battery.
Do not touch anything leaking out from the battery.
Do not let children or animals touch the battery.
Unplug the charger before riding the kickscooter.
Only use the supplied battery and the supplied charger.
Only professionals can disassemble and maintain the battery.
Please refer to your Retailer.
Before using the kickscooter for the first time, fully charge the battery.
Charging should be in a safe, dry and clean environment.
The kickscooter must be powered-off before proceeding with
charging.
Do not use the kickscooter when charging the battery.
1. Open the protective cover on the kickscooter.
Ensure the charging port is dry and insert the battery-charger into
the kickscooter charging port. The other end of the charger must
be connected to the mains to activate the charger.
It is important to connect first the cable to the battery and then to
the mains.
16