It is also possible to select kilometres or miles (Km/H detail is
selected with 0) (P2 function):
IMPORTANT
P3-P4-P5 functions are referred to parameters that the user must
NOT modify.
If modified, there might be a malfunction of the kickscooter.
To reset to factory settings (P6 function), long press the Speed Up
button till the display turns-off.
To exit from "Settings", press again the Speed up and Slow down
buttons for 3 seconds.
ERROR CODES
The display might show error codes (E1: problem with accelerator;
E2/E3/E4: problems with battery voltage; E5/E6: problem with the
engine). In these cases, do not use the electric kickscooter anymore
and contact your Dealer or the after-sale-service.
ACCELERATION
Gently press the accelerator.
11