Manual Program Operations - Toro NO FOUND TMC-424E Quick Reference Manual

• Automatic mode will resume when the
manual operation has been completed.
• To advance through the station
sequence, press the
• To terminate manual operation at any
time, turn the Function Dial to OFF
When the display stops flashing, return
the dial to RUN

Manual Program Operations

• Single Program Operation
1. Turn the Function Dial to
Manual Programs
2. Set the Program Switch to select
program A, B, C, or D. The program
letter and MAN will be displayed. All
stations assigned to the program will
be indicated by solid circles.
button.
.
.
3. Press the
cycle. The first station in sequence will
turn on. The program identifier and
will begin flashing.
4. Turn the Function Dial to RUN
.
• The operating station number, remain-
ing station run time and the
alternate with the current time of day.
• The stations will operate one at a time
in numeric sequence.
• Automatic mode will resume when the
manual operation is finished.
• To turn off an active station and start
the next station in sequence, position
Program Switch (if needed) to select
the program, then press the
• To end manual operation at any time,
turn the Function Dial to OFF
When the display to stops flashing, turn
the Function Dial to RUN
button to start the watering
.
icon
.
icon will
button.
.
5