Set Up And Switch On Your Phone - Nokia 220 4G User Manual

Nokia 220 4G User Guide
Do not connect to products that create an output signal, as this may damage the device. Do
not connect any voltage source to the audio connector. If you connect an external device
or headset, other than those approved for use with this device, to the audio connector, pay
special attention to the volume levels. Parts of the device are magnetic. Metallic materials may
be attracted to the device. Do not place credit cards or other magnetic storage media near the
device, because info stored on them may be erased.
Some of the accessories mentioned in this user guide, such as chargers, headsets, or data
cables, may be sold separately.
Note: You can set the phone to ask for a security code to protect your privacy and personal
data. Select Menu > � > Security > Keyguard > Security code . Note, however, that you
need to remember the code, as HMD Global is not able to bypass it.

SET UP AND SWITCH ON YOUR PHONE

Learn how to insert the SIM cards and memory card, and switch on your phone.
Nano and mini SIM cards
Important: To use this phone, you need a nano SIM card. If you have a dual-SIM phone, you
need a nano SIM card and a mini SIM card. Use only compatible nano and mini SIM cards. Using
an incompatible SIM card may damage the card or the phone, and may corrupt the data stored
on the card.
Note: Switch the device off and disconnect the charger and any other device before removing
any covers. Avoid touching electronic components while changing any covers. Always store
and use the device with any covers attached.
© 2020 HMD Global Oy. All rights reserved. 6