Media Browser Menu; Timeshift Recording; Instant Recording; Watching Recorded Programmes - Telefunken TFLS425090FHDB Operating Instructions Manual

USB device does not support 2.0 speed, an error message
will be displayed.
Note: Recorded programmes are saved into the
connected USB disk. If desired, you can store/copy
recordings onto a computer; however, these files will
not be available to be played on a computer. You can play
the recordings only via your TV.
Note: Lip Sync delay may occur during the timeshifting.
Radio record is supported. The TV can record programmes
up to ten hours.
Recorded programmes are split into 4GB partitions.
If the writing speed of the connected USB disk is not
sufficient, the recording may fail and the timeshifting feature
may not be available.
It is recommended to use USB hard disk drives for
recording HD programmes.
Do not plug out the USB/HDD during a recording. This may
harm the connected USB/HDD.
Multipartition support is available. The maximum of two
different partitions are supported. The first partition of the
USB disk is used for PVR ready features. It also must be
formatted as the primary partition to be used for the PVR
ready features.
Some stream packets may not be recorded because of
signal problems, so sometimes video may freezes during
playback.
Record, Play, Pause, Display (for PlayListDialog) keys can
not be used when teletext is ON. If a recording starts from
timer when teletext is ON, teletext is automatically turned
off. Also teletext usage is disabled when there is an ongoing
recording or playback.

Timeshift Recording

Press (PAUSE) button while watching a broadcast to
activate timeshifting mode.In timeshifting mode, the
programme is paused and simultaneously recorded to the
connected USB disk. Press
resume the paused programme from where you stopped.
Press the STOP button to stop timeshift recording and
return to the live broadcast.
Note: Timeshift cannot be used while in radio mode.
Note : You cannot use the timeshift fast reverse feature
before advancing the playback with the fast forward option.

Media Browser Menu

You can play photo, music, and movie files stored on a USB disk by connecting it to your TV. Connect a USB disk to one of the
USB inputs located on the side of the TV. Pressing the MENU button while in the Media Browser mode will access the Picture, Sound
and Settings menu options. Pressing the MENU button again will exit from this screen. You can set your Media Browser preferences
by using the Settings Menu.
St art playba ck w ith
Start playback with OK and activate
Start playback with OK/
(PLAY) button again to
Loop/Shuffle Mode Operation
a n d a ct iva te
and activate
English - 36 -

Instant Recording

Press (RECORD) button to start recording an event
instantly while watching a programme. You can press
(RECORD) button on the remote control again to record
the next event on the EPG. In this case, an OSD will be
displayed, indicating the programmed events for recording.
Press (STOP) button to cancel instant recording.
Note: You can not switch broadcasts or view the Media Browser
during the recording mode. While recording a programme or during
the timeshifting, a warning message appears on the screen if your
USB device speed is not sufficent.

Watching Recorded Programmes

Select the Recordings Library from the Media Browser
menu. Select a recorded item from the list (if previously
recorded). Press the OK button to view the Play Options.
Select an option then press OK button.
Note: Viewing main menu and menu items will not be available
during the playback.
Press the (STOP) button to stop a playback and return
to the Recordings Library.
Slow Forward
If you press (PAUSE) button while watching recorded
programmes, the slow forward feature will be available. You
can use button to slow forward. Pressing
consecutively will change slow forwarding speed.
Recording Configuration
Select the Recording Configuration item in the Settings
menu to configure the recording settings.
Format Disk: You can use Format Disk feature for
formatting the connected USB disk. Your pin is required to
use the Format Disk feature (default pin is 0000).
IMPORTANT: Note that ALL the data stored on the USB
disk will be lost and the disk format will be converted
to FAT32 if you activate this feature. If your USB disk
malfunctions, you can try formatting the USB disk. In
most cases formatting the USB disk will restore normal
operation; however, ALL the data stored on the USB
disk will be lost in such a case.
Note: If "USB is too slow" message is displayed on the screen
while starting a recording, try restarting the recording. If you
still get the same error, it is possible that your USB disk does
not meet the speed requirements. Try connecting another
USB disk.
T V p l a y s n e x t f i l e a n d l o o p t h e l i s t .
t h e s a m e f i l e w i l l b e p l a y e d i n a l o o p ( r e p e a t ) .
t h e f i l e w i l l b e p l a y e d i n a s h u f f l e .
button