Table of Contents
Advertisement
DO NOT operate, charge, or store the P-touch Label Printer in the following locations (otherwise
leaking, fire, electrical shock, or damage may occur):
Near water, such as in a bathroom or near a water heater, or in an extremely humid location
In a location where it is exposed to rain or moisture
In an extremely dusty location
In an extremely hot location, such as near open flames, heaters, or in direct sunlight
In a closed car under a hot sun
In a location where condensation may form
DO NOT try to disassemble or alter the P-touch Label Printer, otherwise a fire, electrical shock, or
damage may occur. For servicing, adjustments or repairs, contact your Brother dealer. (The
warranty does not cover repairs for damage resulting from disassembly or alterations performed by
the user.)
If the P-touch Label Printer operates abnormally (for example, if it produces smoke, unusual odor,
or noise), stop using it, otherwise a fire, electrical shock, or damage may occur. Immediately turn
the P-touch Label Printer off, disconnect the AC adapter from the electrical outlet, and then contact
your Brother dealer for repairs.
To prevent damage, do not drop or hit the P-touch Label Printer.
DO NOT use the P-touch Label Printer with a foreign object in it. If water, a metal object, or any
other foreign object enters the P-touch Label Printer, disconnect the AC adapter and remove the
battery, and then contact your Brother dealer for repairs.
DO NOT use the P-touch Label Printer in special environments, such as near medical equipment.
Electromagnetic waves may cause the medical equipment to malfunction.
DO NOT allow babies and children to play with the plastic bag that contained the P-touch Label
Printer. Dispose of the bag or keep it away from babies and children. There is a risk of suffocation.
Users with heart pacemakers must move away from the P-touch Label Printer if they sense any
abnormalities. Then, immediately seek the advice of a medical professional.
When transporting the P-touch Label Printer, be sure to carry it by its handle. Lifting the P-touch
Label Printer by any other part may damage the P-touch Label Printer or result in the P-touch Label
Printer falling, which could cause injuries.
AC adapter (AD9100ESA)
Follow these guidelines to avoid fire, damage, electrical shock, failure or the risk of injury.
When connecting the printer to a PC using a USB cable and both are powered by a vehicle, ensure
you have a proper grounding (-) connection to both the printer and the PC. If either device is
improperly grounded, the current will travel through the USB cable causing it to overheat and
possibly catch fire.
WARNING
5
Advertisement
Table of Contents
