LevelOne WBR-6013 Quick Installation Manual page 13

or ISP.
If you are happy with your settings, click Next. (Figure 14)
Wireless Configuration - 5GHz / 2.4GHz
1. Enter SSID.
2. Click on Next. (Figure 15)
3. 3. From the Encryption list, choose the Encryption type and enter related
parameters if necessary, as None / WEP / WPA2(AES) and WPA2 Mixed
Mode(the default settings Security Mode = WPA2 Mixed and passphrase is
xxxxxxxxxxxxxxxx which could be found on the sticker of the bottom side of
the device). For example, the Encryption you choose is None. Click on Next.
(Figure 16)
4. Change setting successfully! Do not turn off or reboot the Device during this
time.
5. Now, the Router has been configured completely, and suitable for Wireless
and Internet Connections.
- 11 –