LevelOne WBR-6013 Quick Installation Manual page 12

Static IP
From the WAN Access Type drop-down list, select Static IP setting.
Enter Local IP Address, Subnet Mask, Default Gateway and DNS which
was given by Telecom or by your Internet Service Provider (ISP).
If you are happy with your settings, click on Next. (Figure 11)
PPPoE
From the WAN Access Type drop-down list, select PPPoE setting.
Enter User Name/Password provided by your ISP. Type them in the relevant
boxes.
If you are happy with your settings, click on Next. (Figure 12)
PPTP
From the WAN Access Type drop-down list, select PPTP setting provided by
your Network Administrator or ISP.
Click on the ratio of Dynamic IP (DHCP) or Static IP.
Enter IP Address for example 172.1.1.1 provided by your Network
Administrator or ISP. (for Static IP only)
Enter Subnet Mask for example 255.255.0.0 provided by your Network
Administrator or ISP. (for Static IP only)
Enter Default Gateway for example 172.1.1.254 provided by your Network
Administrator or ISP. (for Static IP only)
Enter Server Domain Address for example 222.222.222.222 or
www.example.com provided by your Network Administrator or ISP.
Enter User Name for example 1234 provided by your Network Administrator
or ISP.
Enter Password for example 1234 provided by your Network Administrator
or ISP.
If you are happy with your settings, click Next. (Figure 13)
L2TP
From the WAN Access Type drop-down list, select L2TP setting provided by
your Network Administrator or ISP.
Click on the ratio of Dynamic IP (DHCP) or Static IP.
Enter IP Address for example 172.1.1.1 provided by your Network
Administrator or ISP. (for Static IP only)
Enter Subnet Mask for example 255.255.0.0 provided by your Network
Administrator or ISP. (for Static IP only)
Enter Default Gateway for example 172.1.1.254 provided by your Network
Administrator or ISP. (for Static IP only)
Enter Server Domain Address for example 222.222.222.222 or
www.example.com provided by your Network Administrator or ISP.
Enter User Name for example 1234 provided by your Network Administrator
or ISP.
Enter Password for example 1234 provided by your Network Administrator
- 10 –