Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Hallde Manuals
  4. Cutter
  5. CC-32S
  6. User instructions

Hallde CC-32S User Instructions

Combi cutters
Hide thumbs Also See for CC-32S:

Advertisement

Quick Links

Download this manual See also: Instructions for Using
UsER insTRUcTions
combi cUTTERs cc-32s / cc-34
made in sweden. Exclusively distributed and serviced in Australa by Roband Australia Pty Ltd.
All standard Hällde products are designed to run at 220-240V per phase, 50Hz.
All specifications are nominal only. All information contained in this instruction is subject to change without notice
due to constant research and development. Ab Hällde maskiner reserves the right to make changes to machines,
accessories and cutting tools.
Roband Australia Pty Ltd
All care has been taken to ensure correct information at time of printing. Ab Hällde maskiner
1 inman Road,
accepts no responsibility for printing errors.
cromer, nsW 2099
Australia
Tel: +61 2 9971 1788
Fax: +61 2 9971 1336
www.roband.com.au
robandaustralia
0319
Email: sales@roband.com.au

Advertisement

loading

Related Manuals for Hallde CC-32S

Summary of Contents for Hallde CC-32S

  • Page 1 UsER insTRUcTions combi cUTTERs cc-32s / cc-34 made in sweden. Exclusively distributed and serviced in Australa by Roband Australia Pty Ltd. All standard Hällde products are designed to run at 220-240V per phase, 50Hz. All specifications are nominal only. All information contained in this instruction is subject to change without notice due to constant research and development.

  • Page 2: Installation

    Restaurants, shop kitchens, cafés, bakeries, machine will not start when the speed control diet kitchens, retirement homes, schools, fast Combi Cutter CC-32S is in the “I” position. food outlets, day care centers, salad bars, etc. Fit the machine in accordance with the...

  • Page 3: Technical Specification

    To eliminate the risk of damage to the motor, result in connection with both vegetable Press the scraper ring and the scraper handle the CC-32S is fitted with thermal motor preparation attachment and cutter/ bowl together, while rotating the scraper handle protection that automatically switches off the attachment.
  • Page 4 Place the machine on a sturdy bench or table The built-in feed tube is used for cutting long 650–900 mm high. products such as cucumbers, see picture. HALLDE • User Instructions...
  • Page 5 If the contents of the bowl are liquid it should CONTROLS AND SPEEDS: Four speeds be emptied before the knife is removed. TROUBLE SHOOTING (HALLDE 4-Speed) for perfect processing results in connection with both vegetable To eliminate the risk of damage to the USING THE SPEED CONTROL...

  • Page 6: Assembling The Lid

    CC-32S and CC-34 Cutter/Bowl attachment PARTS / ASSEMBLING ASSEMBLING THE BOWL FIT THE SEALING RING SCRAPER HANDLE ASSEMBLING THE LID SCRAPER RING DISMANTLING THE LID KNIFE BOWL MACHINE BASE HALLDE • User Instructions...
  • Page 7 CC-32S and CC-34 Vegetable Preparation attachment PARTS / ASSEMBLING DISMANTLING THE FEEDER USING THE FEEDERS PESTLE LETTUCE ASSEMBLING THE FEEDER VEGETABLE PREPARATION POTATOES ATTACHMENT * CUTTING TOOL TOMATOES ALWAYS USE! EJECTOR PLATE MACHINE BASE HALLDE • User Instructions...
  • Page 8 The QR-code above leeds you to our Cutting in good condition. accordance with the list on page 42-45. Tool Guide at hallde.com. The guide shows DURING USE: which cutting tool is recommended to use TECHNICAL SPECIFICATION...
  • Page 9 RG - 200 AND RG - 250 RG - 200 AND RG - 250 Decoring device Decoring device Cutting tool Slicer Ejector plate Dicing grid KNIFE HOUSE Ejector plate KNIFE HOUSE Dicing combinations available at hallde.com HALLDE • User Instructions...
  • Page 10 Combi Cutter CC-32S, CC-34 and Vertical Cutter Blender VCB-32 HALLDE • User Instructions...

  • Page 11: Declaration Of Conformity

    OF STANDARD EN 12852+A1:2010 EN 1678+A1:2010 Following the provisions of Directive and Regulation: 2014/30/EU, 2014/35/EU, 2006/42/EG, 2011/65/EU, NO 10/2011. Kista 2019-01-04 PLACE AND DATE OF ISSUE Henrik Artursson Andreas Eriksson Manager Design and Engineering Quality Coordinator HALLDE • User Instructions...

This manual is also suitable for:

Cc-34