Summary of Contents for Koala Kare KB108 Oval Baby Bear
Page 1
IMPORTANT. RETAIN FOR FUTURE REFERENCE. READ CAREFULLY. IMPORTANTE. GUÁRDELO PARA FUTURAS CONSULTAS. LEER ATENTAMENTE. IMPORTANT. À CONSERVER POUR INFORMATION. À LIRE ATTENTIVEMENT. WICHTIG. ZUR SPÄTEREN BEZUGNAHME AUFBEWAHREN. BITTE SORGFÄLTIG DURCHLESEN. ® Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112...
Page 2
Please Note: To assure proper installation, it is suggested that a qualified person or carpenter install the Koala Kare Baby Changing Station. Koala Kare Products will not be responsible if the station is not installed properly. Koala Kare Baby Changing Stations have been tested to hold a substantial static load. The unit must be attached to a permanent wall that is capable of holding a substantial load.
Page 3
INSTALLATION INSTRUCTIONS Baby Bear Baby Changing Station Model Number KB108 Step 1. Remove the station from the shipping container and check for any freight damage. Identify the best location for installing the unit. Hold the unit in place and open the bed. Make sure you have taken the operating clearance into consideration.
Page 4
50 lb. Keep one hand on child at all times. Koala Kare Products, A Division of Bobrick 6982 S Quentin Street Centennial, CO 80112 Koala Kare Products, A Division of Bobrick 6982 S Quentin Street Centennial, CO 80112 P/N 975 Ph 888-733-3456/303-539-8300 - www.koalabear.com...
Need help?
Do you have a question about the KB108 Oval Baby Bear and is the answer not in the manual?
Questions and answers