Horizontal recessed-mounted with stainless steel flange baby changing station (25 pages)
Summary of Contents for Koala Kare KB100-ST
Page 1
IMPORTANT. RETAIN FOR FUTURE REFERENCE. READ CAREFULLY. IMPORTANTE. GUÁRDELO PARA FUTURAS CONSULTAS. LEER ATENTAMENTE. IMPORTANT. À CONSERVER POUR INFORMATION. À LIRE ATTENTIVEMENT. WICHTIG. ZUR SPÄTEREN BEZUGNAHME AUFBEWAHREN. BITTE SORGFÄLTIG DURCHLESEN. Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112...
Page 2
To assure proper installation, it is suggested that a qualified person or carpenter install the Koala Baby Changing Station. Koala Kare Products will not be responsible if the station is not installed properly. Koala Baby Changing Stations have been tested to hold a substantial static load. The unit must be attached to a permanent wall that is capable of holding a substantial load.
Page 3
INSTALLATION INSTRUCTIONS Horizontal Baby Changing Station Recessed Mounted Model Numbers KB100-ST and KB110-SSRE Step 1. Remove changing station from the shipping container and check for any freight damage. Identify the best location for installing the unit. Hold the unit in place and open the bed.
Page 4
ASTM F 2285-04 (2010) WARNING: ATTENTION : Never leave child Ne laissez jamais unattended. un enfant sans surveillance. WARNING: ATTENTION : Avoid serious injury Évitez les from falling or sliding out. Always use blessures occasionnées par une chute ou restraint system. une glissade.