Installation Of The Expansion Card And Resource Card(S); Remove Dummy Cover Or Expansion Card - BinTec X4100 Installation Manual

Remove Dummy Cover or Expansion Card

2 Installation of the Expansion Card
and Resource Card(s)
Caution!
Electrostatic charges can damage electronic components. Please
observe the following precautions to avoid damaging compo-
nents:
2.1 Remove Dummy Cover or Expansion
Card
Firstly, remove the dummy cover of the expansion slot of the basic unit of
X4100/200/300 or remove an expansion card that is already installed.
Danger!
Do not touch any parts inside the extension slot when installing or
replacing the extension card. There is a risk of electric shock!
Ground yourself before unpacking the expansion card or re-
source card and before carrying out installation work on the
equipment.
Only grip printed circuit boards at the edges and do not touch
cables or components.
Do not touch any parts inside the extension slot of
X4100/200/300!
X4100/200/300 Installation
2
23